Zur Druckansicht wechseln Visit the English version of this page

www.jb-electronics.de » Elektronik » Nixie-Röhren » Nixie-Sammlung » GS-1

GS-1

Die GS-1 ist eine kleine Sonderzeichenröhre zur GN-1 vom britischen Hersteller STC mit einer Ziffernhöhe von gerade einmal 10mm:

Die GS-1 im Größenvergleich

Die GS-1 ist für eine Kopffüßler-Nixie recht hoch aufgebaut; hier ist die GS-1 im Ruhezustand zu sehen:

Die GS-1 im RuhezustandDie GS-1 im Ruhezustand

Die Beschriftung ist sehr knapp, ein Datumscode fehlt leider.

Die GS-1 im Ruhezustand

Die GS-1 im Ruhezustand

Die GS-1 im RuhezustandDie GS-1 im Ruhezustand

Auffällig ist der Novalsockel, den auch die GI-10 oder NUP100 besitzen.

Eine weitere Auffälligkeit der GS-1 ist ihre geringe Größe. Die Nomenklatur sagt uns, dass die GS-1 zur GN-1 gehört, welche allerdings eine Ziffernhöhe von 25mm besitzt, und somit in einem größeren Glaskolben untergebracht ist, der zudem noch eine ganz andere Fassung hat. Normalerweise sind numerische Röhre und die dazu passende Sonderzeichenröhre aber in gleich bemessenen Glaskolben untergebracht, damit sie nachher gut zueinander ausgerichtet werden können. Das ist hier nicht der Fall.

Hier ist das Leuchtbild der GS-1 zu sehen:

Das Symbol '+'Das Symbol '-'

Gut zu erkennen im rechten Bild ist das aus zwei Drahtstücken gefertigte Pluszeichen, was auf das höhere Alter dieser Nixie hindeutet.

Hier ist das Leuchtbild der GS-1 von der Seite zu sehen; es fällt auf, dass der Betrachtungswinkel recht klein ist, da die Symbole recht weit im Inneren der GS-1 liegen.

Das Leuchtbild der GS-1 von der Seite

Das Glas ist recht dick, sodass die Symbole durch die Brechung von der Seite aus leicht verzerrt aussehen:

Das Leuchtbild der GS-1 von der Seite

Leider besitze ich kein Datenblatt zur GS-1. Sollte jemand im Besitz dieses Datenblattes sein, würde ich mich über eine Mail diesbezüglich sehr freuen.

Achtung! Neben der GS-1 existiert sicherlich noch die GS-2, die die Sonderzeichenröhre zur GN-2 darstellt. Besitzen Sie eine solche Röhre, oder kennen Sie eine Quelle? Schreiben Sie mir doch eine Email, wenn Sie mir helfen können, ich würde mich freuen! Achtung!

Nach oben

show print layout Die deutsche Version der Seite besuchen

www.jb-electronics.de » Electronics » Nixie Tubes » Nixie Tube Collection » GS-1

GS-1

The GS-1 is a small special symbol Nixie tube for the GN-1 from the British manufacturer STC with a digit height of only 10mm:

The GS-1 in size comparison

The GS-1 is rather tall for a top view Nixie tube; here you can see the GS-1 in state of rest:

The GS-1 in state of restThe GS-1 in state of rest

The labelling is rather spartan, sadly a date code is missing.

The GS-1 in state of rest

The GS-1 in state of rest

The GS-1 in state of restThe GS-1 in state of rest

A striking feature is the noval socket that we also find with the GI-10 or NUP100.

The size is also quite unusual. British nomenclature for Nixie tube tells us that the GS-1 is the special symbol Nixie tube for the GN-1, having a digit height of 25mm. Because of the larger digit height, the GN-1 is housed in a larger glass bulb, having a whole other base as well. Normally, numeric Nixie tubes and their matching special symbol tubes use the same glass bulb and the same base to simplify mutual alignment in a panel for example. This is not the case with the GS-1 and GN-1.

Here you can see the glowing GS-1:

The symbol '+'The symbol '-'

The plus sign - made out of two individual pieces of wire, indicating the higher age of this tube - can clearly be seen in the right picture.

This is the display of the GS-1 from the side; the viewing angle is rather small because the symbols are mounted quite deep inside the glass bulb.

The glowing GS-1 from the side

The thick glass defracts the light, especially on the edges, which makes the displayed symbol appear a little blurry:

The glowing GS-1 from the side

Unfortunately, I do not have any datasheet for the GS-1. If someone can provide me with a datasheet, please email me.

Attention! Just like the GS-1 being the special symbol Nixie tube for the GN-1, there most likely is the GS-2 for the GN-2. Do you possess one of these tubes, have some pictures, or maybe know a source for them? I would be glad if you dropped me an email. Attention!

To the top