Zur Druckansicht wechseln Visit the English version of this page

www.jb-electronics.de » Elektronik » Nixie-Röhren » Nixie-Sammlung » GR10J

GR10J

Die GR10J stammt vom englischen Hersteller Hivac und wird außerdem - wie alle Hivac-Nixies - als Numicator bezeichnet. Die Nixie fällt durch ihre relativ große Ziffernhöhe von 30mm und ihr kupferfarbenes Anodengitter auf; zudem ist sie ziemlich selten:

Die GR10J im Größenvergleich

Es existiert eine weitere GR10J, die einen schwarzen Sockelummantelung besitzt, diese Version wird hier beschrieben: GR10J - Version 2.

Hier ist die GR10J im Ruhezustand zu sehen:

Die GR10J im RuhezustandDie GR10J im Ruhezustand

Hier ist der Sockel (B26A) der GR10J zu sehen; jedoch sind hier in der Mitte nur drei unbeschaltete Pins zu finden, entgegen der GR10G (rechtes Bild) mit ihren unbeschalteten 9 Pins. Wo genau da der Sinn lag, ist heute nicht mehr erkennbar.

Der Sockel der GR10JDer Sockel der GR10G

Hier ist das Leuchtbild der GR10J zu sehen:

Die Ziffer 0Die Ziffer 1Die Ziffer 2

Die Ziffer 3Die Ziffer 4Die Ziffer 5

Die Ziffer 6Die Ziffer 7Die Ziffer 8

Die Ziffer 9

Das Glimmen des Neons in Kombination mit der kupferfarbenen Anode macht schon etwas her:

Die Ziffer 9 von der Seite

Hier ein paar Daten zur GR10J:

Daten zur GR10J

Das komplette Datenblatt gibt es hier zum Download: GR10J.pdf (114 KB).

Nach oben

show print layout Die deutsche Version der Seite besuchen

www.jb-electronics.de » Electronics » Nixie Tubes » Nixie Tube Collection » GR10J

GR10J

The GR10J from the British manufacturer Hivac is also referred to as a Numicator - as with all Nixie tubes manufactured by Hivac. The GR10J Nixie tube stands out due to her relatively large digit height of 30mm as well as the copper-colored anode mesh; the GR10J is a rather rare Nixie tube:

The GR10J in size comparison

There is another GR10J that has a black heat shrinking tube wrapped around the socket, this model is described seperately: GR10J - Model 2.

Here you can see the GR10J in state of rest:

The GR10J in state of restThe GR10J in state of rest

This is the base (B26A) of the GR10J; in the center of the outer circle there are only three pins (and these are not connected) whereas the GR10G (right picture) has nine (unconnected) pins in the center. The point of this abnormality is not obvious.

The base of the GR10JThe base of the GR10G

This is how the ignited GR10J looks like:

The digit 0The digit 1The digit 2

The digit 3The digit 4The digit 5

The digit 6The digit 7The digit 8

The digit 9

The glow of neon in combination with the copper-colored anode mesh looks amazing:

The digit 9 from the side

Here you can see some data for the GR10J:

Data for the GR10J

The complete datasheet can be downloaded here: GR10J.pdf (114 KB).

To the top